Aut. Chain Lubrication
... for lower power consumption and less noise
The automatic chain lubrication system consists of one pump unit and two lubrication modules that are fitted to the elevator. This lowers the noice and the power consumption.
Simatek Bulk Systems' automatic chain lubrication system is developed as an accessory for our bucket elevators to obtain the following advantages:
- Lower power consumption
- Less noise
- Higher reliability
- Longer service life
- Fewer interruptions of operation
The chain lubrication system consists of one pump unit and two lubrication modules that are fitted to the elevator.
The pump unit is multi-adjustable so that the amount of lubricant can be adjusted very precisely and adapted to current requirements.
The lubricant is fed separately to the nozzle immediately over the chain where compressed air is applied as a propellant.
The lubricant module is fitted to the elevator, typically on the vertical section where there is easy access for service and inspection.
The lubricant module is adapted to each model and is supplied in different versions.
As a standard, the lubricant module is delivered with lubricant nozzle and air nozzle for cleaning dust from chains, aspiration branch and spill box for excess oil.
A special lubricant module for the food industry or where chains and buckets are washed regularly consists of a stainless steel nozzle for lubrication, without air purification, aspiration and spill box.
Air connection, 4-6 bar
Air consumption at 6 bar, 60-100 L/min.
Electricity connection std. 24V DC
Pump strokes from 3/sec. - 1/min.
(Other voltages can be supplied according to requirements)
D=210 W=400 H=400
Varnished or AISI-316, 1.4 mm